Thanks for the info!.
wilson
> -----Original Message-----
> From: Josh Hillman [mailto:admin-maillist@talstar.com]
> Sent: Tuesday, July 11, 2000 9:38 PM
> To: emerald@iea-software.com
> Subject: Re: [Emerald] AcctTerminateCause
>
>
> From: <wilson@dagupan.com>
> > Hi, can someone point me to 'human readable' form the
> AcctTerminateCause.
> My
> > web reports simply state '1' or '2' or '17'
> > is there a translation somewhere?
>
> RFC-2139 (RADIUS Accounting) has the translations for what's
> in RFC-2138
> (RADIUS)
>
> Type
>
> 49 for Acct-Terminate-Cause
>
> Length
>
> 6
>
> Value
>
> The Value field is four octets, containing an integer specifying
> the cause of session termination, as follows:
>
> 1 User Request
> 2 Lost Carrier
> 3 Lost Service
> 4 Idle Timeout
> 5 Session Timeout
> 6 Admin Reset
> 7 Admin Reboot
> 8 Port Error
> 9 NAS Error
> 10 NAS Request
> 11 NAS Reboot
> 12 Port Unneeded
> 13 Port Preempted
> 14 Port Suspended
> 15 Service Unavailable
> 16 Callback
> 17 User Error
> 18 Host Request
>
>
>
> The termination causes are as follows:
>
> User Request User requested termination of service, for
> example with LCP Terminate or by
> logging out.
>
> Lost Carrier DCD was dropped on the port.
>
> Lost Service Service can no longer be provided; for
> example, user's connection to a host was
> interrupted.
>
> Idle Timeout Idle timer expired.
>
> Session Timeout Maximum session length timer expired.
>
> Admin Reset Administrator reset the port or session.
>
> Admin Reboot Administrator is ending service on the NAS,
> for example prior to rebooting the NAS.
>
> Port Error NAS detected an error on the port which
> required ending the session.
>
>
>
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart
>
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart