[RadiusNT] MOXA CN2116 NAS Server with RadiusNT

janjic@simt.com.mk
Thu, 16 Mar 2000 14:49:20 +0100

Hi,
I have configured a NAS box from MOXA, which claims Radius compatibility,
although with very limited possibility for configuration,
- I use RadiusNT v. 1.16.60 (which was running ok with NT RRAS)
- text mode
- PAP authentication

what I saw different first, were more than one response to the NAS when it sends
registration data on boot,
here is the -x15 respond

radrecv: Request from host c31a806d code=4, ud=0, length=42
NAS-IP-Address = 195.26.128.106
Acct-Status-Type = 7
Acct-Session-Id = "16000000"
Sending Accounting Ack. of id=0 to c31a806d <195.26.128.106>
Response Time: 32

here is the respond on NAS sending the PAP password (again, this appears in a
loop)

radrecv: Request from host c31a806d code=4, ud=0, length=57
NAS-IP-Address = 195.26.128.106
User-Name = "predrag"
NAS-Port = 0
Acct-Status-Type = Start
Acct-Session-Id = "00000001"
Sending Accounting Ack. of id=2 to c31a806d <195.26.128.106>
Response Time: 62

after trying this several times, request gets discarded

Note: sometime, last few attempts are with a : Acct-Status-Type = Stop

what could be the problem ...
TIA,
Predrag Janjic,
Network Engineer
SIMT d.o.o. - Skopje, MACEDONIA
tel. +389 91 118 612
fax. +389 91 118 667
janjic@simt.com.mk

For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart