RE: [RadiusNT] Assigning IP Addresses

Herman verschooten ( H.verschooten@WebVisie.net )
Thu, 9 Mar 2000 13:08:45 +0100

Run it in debug mode, then you can see what it sends back to the NAS. Also
make sure your NAS is willing to assign the address.

Herman

-----Original Message-----
From: radiusnt-request@iea-software.com
[mailto:radiusnt-request@iea-software.com]On Behalf Of radius
Sent: dinsdag 7 maart 2000 23:26
To: radiusnt@iea-software.com
Subject: Re: [RadiusNT] Assigning IP Addresses

I am using the accountid it seems like it never loads the user specific
attributes.

---------- Original Message ----------------------------------
From: "Terry Bomersbach" <terryb@the-cia.net>
Reply-To: radiusnt@iea-software.com
Date: Tue, 7 Mar 2000 15:01:35 -0600

>I would check to make sure that you are using the correct accountid from
>subaccounts and not the customerid.
>
>
>For more information about this list (including removal) go to:
>http://www.iea-software.com/support/maillists/liststart
>

For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart

For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart