ftp://ftp.iea-software.com/RadiusNT/updates/radcheck.zip
-----Original Message-----
From: Bob's Lists [mailto:bob.lists@raha.com]
Sent: Monday, February 14, 2000 3:23 PM
To: radiusnt@iea-software.com
Subject: RE: [RadiusNT] RadiusNT Crashes
Add another one to that list...
I have a script running, that does a 'net start radius' every 1 minute - if
it's running the command's ignored, if it's not it restarts it...
Thought it was just me...
Hello... earth to IEA... we seem to have a problem here... ;-)
Regards
Bob
> -----Original Message-----
> From: radiusnt-request@iea-software.com
> [mailto:radiusnt-request@iea-software.com]On Behalf Of Michael Saunders
> Sent: Monday, February 14, 2000 10:43 PM
> To: radiusnt@iea-software.com
> Subject: Re: [RadiusNT] RadiusNT Crashes
>
>
> Yep I have the same problem as well. We have to radius NT in debug mode
>
>
> Michael Saunders
> ----- Original Message -----
> From: "Nathan Haywood" <nhaywood@whro.org>
> To: <radiusnt@iea-software.com>
> Sent: Tuesday, February 15, 2000 5:22 AM
> Subject: RE: [RadiusNT] RadiusNT Crashes
>
>
> > We've had the same problem under 2.5 and 3.0. Right now, we're running
> > RadCheck to keep Radius running while we wait for someone to get back to
> us.
> >
> > -----Original Message-----
> > From: Greg White [mailto:GWhite@bctelco.com]
> > Sent: Monday, February 14, 2000 1:06 PM
> > To: 'radiusnt@iea-software.com'
> > Subject: RE: [RadiusNT] RadiusNT Crashes
> >
> >
> > We, too, have been having this problem. The only way we have
> been able to
> > keep Radius running is by running it in debug mode. We are currently
> > running version 3.0.147, using SNMP concurrency checking, but
> no proxying.
> >
> >
> > Thank you,
> >
> > Greg White
> > Internet Network Administrator
> > Beaver Creek Cooperative Telephone Company
> >
> >
> > >-----Original Message-----
> > >From: Chris Kissinger [mailto:chris@aci.net]
> > >Sent: Monday, February 14, 2000 10:03 AM
> > >To: radiusnt@iea-software.com
> > >Subject: RE: [RadiusNT] RadiusNT Crashes
> > >
> > >
> > >We are having the same problems with radius. It started when we went to
> > >Enterprise version and enabled user proxy using 2.5.x we are now using
> > >3.0.162 and are still having the same problem. Engineering at iea is
> > >looking at Dr. Watson and debug logs.
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: Carlos J Salas [mailto:cjsalas@centennialpr.com]
> > > Sent: Monday, February 14, 2000 5:28 AM
> > > To: radiusnt@iea-software.com
> > > Subject: [RadiusNT] RadiusNT Crashes
> > >
> > > I have RadiusNT installed and running. During a the
> > >week it crashes like 4
> > > to 5 times with error 0xc0000005. We just Start the
> > >service again, and it
> > > may run for 2-3 days or it may just run for 2-3 hours.
> > >Does anyone has had
> > > the same problem? How can we fix this?
> > >
> > > On another note, I'm trying to activate User Proxy in
> > >the RadiusNT Admin,
> > > but when I choose User Proxy with the sub-tabs
> > >Authentication and Accounting
> > > selected, I save the configuration and when I go back to
> > >check the
> > > configuration, only User Proxy is selected but the
> > >sub-tabs (Authentication
> > > and Accounting) is not selected. What could this be?
> > >
> > > Carlos J Salas
> > >
> > >
> > > For more information about this list (including removal)
> > >go to:
> > > http://www.iea-software.com/support/maillists/liststart
> > >
> > >For more information about this list (including removal) go to:
> > >http://www.iea-software.com/support/maillists/liststart
> > >
> >
> > For more information about this list (including removal) go to:
> > http://www.iea-software.com/support/maillists/liststart
> >
> > For more information about this list (including removal) go to:
> > http://www.iea-software.com/support/maillists/liststart
>
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart