Yep, TCM is reporting the correct values for callerid on the NAS.
Thanks,
----- Original Message -----
From: Dale E. Reed Jr. <daler@iea-software.com>
To: <radiusnt@iea-software.com>
Sent: Thursday, 13 January 2000 3:22
Subject: Re: [RadiusNT] callerid
> Cameron Westlake wrote:
> >
> > The numbers we are getting are not valid phone numbers and don't seem to
be
> > related. We have 2 NAS's that we have callerid switched on by the Telco
and
> > are testing. They are around 400km apart and obviously use different
> > exchanges and different hunt groups but the numbers are within the same
> > range with some being repeated on both NAS's. The only thing that I can
> > assume it relates to (but makes no sense) is the modem card / slot that
the
> > call is answered on. There are more callerid values for Geraldton which
is
> > a Hiper Arc with 8x30 modem cards than Wongan which is a Netsever with
2x30
> > modem cards.
>
> The only thing I could think of is:
>
> 1) Look at the debug from your NAS side and see if the CallerID
> information is listed incorrect in the debug as well.
>
> 2) Ask the telco what they are sending you. It really sounds
> like something is messed up with the telco.
>
>
> --
>
> Dale E. Reed Jr. Emerald and RadiusNT
> __________________________________________
> IEA Software, Inc. www.iea-software.com
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart