I've looked to the informations given by radius -x15 and the accounting time
for a stop packet (AcctStatusType=2) is between 100 and 300 ms during high
charges.
Another idea ?
----- Original Message -----
From: Dale E. Reed Jr. <daler@iea-software.com>
To: <radiusnt@iea-software.com>
Sent: Monday, November 08, 1999 6:56 PM
Subject: Re: [RadiusNT] CallsOnLine not correct ?
> Dave wrote:
> >
> > Yes, I've created the ports for every slot ISDN or Analog for the
different
> > max...
> >
> > And I've got phantom connection in ISDN and Analog...
>
> Check your accounting timeouts, and make sure they are set to 5-7
> seconds.
> The default for an Ascend is one, which can cause problems.
>
> > David
> > ----- Original Message -----
> > From: <hostmaster@interaxs.net>
> > To: <radiusnt@iea-software.com>
> > Sent: Monday, November 08, 1999 2:38 PM
> > Subject: Re: [RadiusNT] CallsOnLine not correct ?
> >
> > > Have you entered 2 sets of ports for each MAX? You need a set like
20101,
> > > 20102, etc. for analog callers and a set like 10101, 10102, etc. for
ISDN
> > > users.
> > >
> > > Jim
> > >
> > > At 02:19 PM 11/8/1999 +0100, you wrote:
> > > >Finally, the problem is not solved, I don't understand my Calls table
is
> > > >correct, I've got all the logs but the calls on line doesn't show all
the
> > > >users connected in the ascend...
> > > >It's very strange, I've checked my NASPorts but they all are
correct...
> > > >
> > > >Perhaps is it because I don't log the informations corresponding to
the
> > > >beginning of the session (AcctStatusType=1) ?
> > > >I always use the view given with Radius, could it be a problem with
the
> > view
> > > >during the modification of port status ?
> > > >
> > > >David
> > > >
> > > >----- Original Message -----
> > > >From: Dale E. Reed Jr. <daler@iea-software.com>
> > > >To: <radiusnt@iea-software.com>
> > > >Sent: Thursday, November 04, 1999 7:38 PM
> > > >Subject: Re: [RadiusNT] CallsOnLine not correct ?
> > > >
> > > >
> > > > > > Dave wrote:
> > > > > >
> > > > > > I've got some trouble with our CallsOnline view :
> > > > > > .The view doesn't reflect all the users we've got in the ascend
max
> > > > > > 4000's and 2000's
> > > > >
> > > > > You might trying running this script to see if you missed any
ports.
> > > > > You might have to run it several times (like once a week or day)
> > > > > to eventually pick up all ports.
> > > > >
> > > > > ftp://ftp.iea-software.com/RadiusNT/MSSQL/updtports.sql
> > > > >
> > > > > > I've added a trigger to the Calls table to do statistics on
the
> > > > > > users calls.
> > > > >
> > > > > > Could it be the trigger wich does stastics ?
> > > > >
> > > > > Maybe, however, without seeing the trigger, I couldn't tell you
> > > > > specifically.
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > >
> > > > > Dale E. Reed Jr. Emerald and RadiusNT
> > > > > __________________________________________
> > > > > IEA Software, Inc. www.iea-software.com
> > > > >
> > > > > For more information about this list (including removal) go to:
> > > > > http://www.iea-software.com/support/maillists/liststart
> > > >
> > > >
> > > >For more information about this list (including removal) go to:
> > > >http://www.iea-software.com/support/maillists/liststart
> > >
> > > ----------------------------
> > > hostmaster@interaxs.net
> > > InterNet Access Network
> > > 18 McDaniel Street
> > > Dayton, OH 45405-4816
> > > Voice: 937-461-3660 Fax:937-228-2773
> > >
> > > For more information about this list (including removal) go to:
> > > http://www.iea-software.com/support/maillists/liststart
> >
> > For more information about this list (including removal) go to:
> > http://www.iea-software.com/support/maillists/liststart
>
>
> --
>
> Dale E. Reed Jr. Emerald and RadiusNT
> __________________________________________
> IEA Software, Inc. www.iea-software.com
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart