Re: [RadiusNT] CallsOnLine not correct ?

Dale E. Reed Jr. ( (no email) )
Mon, 08 Nov 1999 09:56:49 -0800

Dave wrote:
>
> Yes, I've created the ports for every slot ISDN or Analog for the different
> max...
>
> And I've got phantom connection in ISDN and Analog...

Check your accounting timeouts, and make sure they are set to 5-7
seconds.
The default for an Ascend is one, which can cause problems.

> David
> ----- Original Message -----
> From: <hostmaster@interaxs.net>
> To: <radiusnt@iea-software.com>
> Sent: Monday, November 08, 1999 2:38 PM
> Subject: Re: [RadiusNT] CallsOnLine not correct ?
>
> > Have you entered 2 sets of ports for each MAX? You need a set like 20101,
> > 20102, etc. for analog callers and a set like 10101, 10102, etc. for ISDN
> > users.
> >
> > Jim
> >
> > At 02:19 PM 11/8/1999 +0100, you wrote:
> > >Finally, the problem is not solved, I don't understand my Calls table is
> > >correct, I've got all the logs but the calls on line doesn't show all the
> > >users connected in the ascend...
> > >It's very strange, I've checked my NASPorts but they all are correct...
> > >
> > >Perhaps is it because I don't log the informations corresponding to the
> > >beginning of the session (AcctStatusType=1) ?
> > >I always use the view given with Radius, could it be a problem with the
> view
> > >during the modification of port status ?
> > >
> > >David
> > >
> > >----- Original Message -----
> > >From: Dale E. Reed Jr. <daler@iea-software.com>
> > >To: <radiusnt@iea-software.com>
> > >Sent: Thursday, November 04, 1999 7:38 PM
> > >Subject: Re: [RadiusNT] CallsOnLine not correct ?
> > >
> > >
> > > > > Dave wrote:
> > > > >
> > > > > I've got some trouble with our CallsOnline view :
> > > > > .The view doesn't reflect all the users we've got in the ascend max
> > > > > 4000's and 2000's
> > > >
> > > > You might trying running this script to see if you missed any ports.
> > > > You might have to run it several times (like once a week or day)
> > > > to eventually pick up all ports.
> > > >
> > > > ftp://ftp.iea-software.com/RadiusNT/MSSQL/updtports.sql
> > > >
> > > > > I've added a trigger to the Calls table to do statistics on the
> > > > > users calls.
> > > >
> > > > > Could it be the trigger wich does stastics ?
> > > >
> > > > Maybe, however, without seeing the trigger, I couldn't tell you
> > > > specifically.
> > > >
> > > >
> > > >
> > > > --
> > > >
> > > > Dale E. Reed Jr. Emerald and RadiusNT
> > > > __________________________________________
> > > > IEA Software, Inc. www.iea-software.com
> > > >
> > > > For more information about this list (including removal) go to:
> > > > http://www.iea-software.com/support/maillists/liststart
> > >
> > >
> > >For more information about this list (including removal) go to:
> > >http://www.iea-software.com/support/maillists/liststart
> >
> > ----------------------------
> > hostmaster@interaxs.net
> > InterNet Access Network
> > 18 McDaniel Street
> > Dayton, OH 45405-4816
> > Voice: 937-461-3660 Fax:937-228-2773
> >
> > For more information about this list (including removal) go to:
> > http://www.iea-software.com/support/maillists/liststart
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart

-- 

Dale E. Reed Jr. Emerald and RadiusNT__________________________________________IEA Software, Inc. www.iea-software.com

For more information about this list (including removal) go to:http://www.iea-software.com/support/maillists/liststart