- Danny
----- Original Message -----
From: NCKCN <ttuttle@nckcn.com>
To: <emerald@iea-software.com>
Sent: Tuesday, May 16, 2000 9:22 PM
Subject: Re: [Emerald] RadiusNT - problem with TimeBanking - very big value
for Session Timeout
> How did you activate aaa authorization properly to get this accomplished?
> If you don't mind sending that info...
>
> :^)
>
>
> ----- Original Message -----
> From: "Danny Sinang" <danny@uplink.com.ph>
> To: <emerald@iea-software.com>
> Sent: Tuesday, May 16, 2000 8:27 AM
> Subject: Re: [Emerald] RadiusNT - problem with TimeBanking - very big
value
> for Session Timeout
>
>
> > It does. Believe me, it does. We use a Cisco 2610 with an NM-16AM and
IOS
> > 11.3(4) .
> >
> > We just had to activate aaa authorization properly.
> >
> > - Danny
> >
> > ----- Original Message -----
> > From: NCKCN <ttuttle@nckcn.com>
> > To: <emerald@iea-software.com>
> > Sent: Tuesday, May 16, 2000 9:15 PM
> > Subject: Re: [Emerald] RadiusNT - problem with TimeBanking - very big
> value
> > for Session Timeout
> >
> >
> > > Danny,
> > >
> > > I don't think the Cisco supports Session-Timeout from the Radius
Server.
> > We
> > > have always had to set Session-Timeout on the router itself. There was
a
> > > discussion a while back on this very thing and I don't think anyone
got
> it
> > > to work on a Cisco.
> > >
> > > -----------------------------------------------------------------
> > > Thank You
> > > Network Administration Staff
> > > North Central Kansas Community Network
> > > -----------------------------------------------------------------
> > >
> > >
> > > ----- Original Message -----
> > > From: "Danny Sinang" <danny@uplink.com.ph>
> > > To: <support@iea-software.com>
> > > Cc: "Emerald" <emerald@iea-software.com>
> > > Sent: Tuesday, May 16, 2000 5:59 AM
> > > Subject: [Emerald] RadiusNT - problem with TimeBanking - very big
value
> > for
> > > Session Timeout
> > >
> > >
> > > > I am running RadiusNT 2.5.267 along with Emerald 2.5 using a SQL
> Server
> > > 6.5
> > > > database.
> > > >
> > > > I configured several services and made some Service Defaults for
them,
> > > > namely :
> > > >
> > > > 1. ServiceType = Framed
> > > > 2. Framed Protocol = PPP
> > > > 3. Session Timeout = 0
> > > >
> > > > I then enabled TimeBanking and gave several users several minutes in
> > their
> > > > TimeLeft field. The problem is, no one gets disconnected after their
> > > > TimeLeft has elapsed.
> > > >
> > > > I inspected the Log file and saw that RadiusNT is sending a
> > SessionTimeout
> > > =
> > > > 0 to the NAS.
> > > >
> > > > Is this the way RadiusNT is supposed to work ?
> > > >
> > > > I tried deleting the SessionTimeout from the service defaults and
> tried
> > > > dialling in as TimeBanked user. This time, the SessionTimeout
> attribute
> > it
> > > > sent the NAS is the remaining value of TimeLeft. However, the user
> still
> > > > won't get disconnected from the NAS.
> > > >
> > > > My NAS is a Cisco 2600 and its debug output does not show anything
> > funny.
> > > >
> > > > However, I noticed that when the NON-TimeBanked users, RadiusNT
sends
> > them
> > > a
> > > > SessionTimeout whose value is 679952640.
> > > >
> > > > What could be wrong ?
> > > >
> > > > - Danny
> > > >
> > > >
> > > >
> > > >
> > > > For more information about this list (including removal) go to:
> > > > http://www.iea-software.com/support/maillists/liststart
> > >
> > >
> > > For more information about this list (including removal) go to:
> > > http://www.iea-software.com/support/maillists/liststart
> >
> >
> > For more information about this list (including removal) go to:
> > http://www.iea-software.com/support/maillists/liststart
>
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart