Re: [Emerald] Bad Authenticator

Danny Sinang ( (no email) )
Sun, 13 Feb 2000 07:55:42 +0800

Hi Howard,

I created a Time-on-line ASP page a long time ago. It's written for an MS
Access Backend. I've also recently written one for SQL Server. Let me know
if you still haven't gotten any from somebody else.

I have also successfully used EmerAuth for Imail. I sent the step-by-step
instructions to the Emerald mailing list a few days ago. And I also learned
that you should apply the latest Imail patch (6.x upgrade to 6.2) to get
Emerauth working properly.

- Danny

----- Original Message -----
From: Howard A. Brooks <admin@iamnow.net>
To: <emerald@iea-software.com>
Sent: Sunday, February 13, 2000 1:28 AM
Subject: Re: [Emerald] Bad Authenticator

> NO MORE ZEROS! A reboot of the Computone (without forcing any
> AUI ports) did the trick. Now onto a Time-on-line web page, and
> then EmerAuth for Serv-U and Imail. Do you have any reference
> for Time-on-line for me Dale, and I'll leave you alone,
> hopefully...
>
> Seriously, thank you for your patience and help...Patience only
> exceeded by mine, however. grin grin :-)
>
> Howard A. Brooks, IamNet, Inc. - http://iamnow.net
> "Your One Stop Internet Support and Solution Shop" -
> howard@iamnow.net
>
> > > "Howard A. Brooks" wrote:
> > >
> > > It's running now with zeros for Acct! But below is what a
> page
> > > looks like: I will reboot the Computone tomorrow AM at let
> you
> > > know what happens. The Computone PR uses an AUI port with a
> > > Transceiver to coax so I adjusted the software to "force" to
> the
> > > AUI port rather than let the PR detect it. Secondly, I
> turned
> > > RIP to "none" for each Port that is assigned to each user at
> > > login. Perhaps these two changes will improve how the PR
> sees
> > > RadiusNT, but not certain. Does anyone using a PR know if
> this
> > > is an issue?
> >
> > You might check your ports. I know that in the PR docs, it
> says
> > that it will stop sending accounting information, if the
> accounting
> > server timesout. It doens't say how to restart it.
> RadiusNT
> > only writes what it receives.
> >
> >
> > --
> >
> > Dale E. Reed Jr. Emerald and RadiusNT
> > __________________________________________
> > IEA Software, Inc. www.iea-software.com
> >
> > For more information about this list (including removal) go to:
> > http://www.iea-software.com/support/maillists/liststart
> >
>
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart

For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart